[セット内容]
・ポンプ本体
・コントローラー
・ケーブル5m
・吸気口スクリーン
[仕様]
Specfications |
ATP80 |
| Inlet flange |
|
DN63CF-F |
| Pumping speed |
N2 l/s |
80 |
| He l/s |
50 |
| H2 l/s |
40 |
| Compression ratio |
N2 |
8x107 |
| He |
2,500 |
| H2 |
300 |
| Ultimate pressure(1)(2) |
mbar |
5x10-9 |
| Maximum continuous inlet pressure(2) |
mbar |
1x10-1 |
| Maximum exhaust pressure(2) |
mbar |
2x10-1 |
| Minimum recommended fore pump |
|
Pascal 2005 |
| Mouting orientation |
|
Any |
| Rotational speed |
rpm |
27,000 |
| Start-up time |
min |
1min45s |
| Maximum ambient temperature |
℃ |
Pump 50℃/Controller 40℃ |
| Maximum bake out temperature on flange |
℃ |
120 |
| Exhaust flange |
ISO-KF |
DN25 |
| Weight ambient cooled |
kg(lb) |
4.3(9.5) |
| Weight air cooled |
kg(lb) |
5.3(11.7) |
| Weihght water cooled |
kg(lb) |
4.4(9.7) |
| Controller |
|
ACT200T |
| Controller weight |
kg(lb) |
2.6(5.7) |
| Contoroller size |
|
1/4Rack |
| Power supply(3) |
|
100 to 240 V-50/60 Hz - Single phase |
| Maximum power consumption |
VA |
100 |
(1) Measured to Pneurop standards (CPF flamge, after 48 hours of baking with an exhaust pressure below to 102 mbar)
(2) Water cooled model with CF-F inlet flange
(3) For ACT 200T, ACT250, ACT600T, ACT1000T only
